大发快三计划

Hello, welcome to the Zibo Domaster Insulators Co., Coro.

中文

+ 0533-5582999

suntengyue@zbdms。com

内页banner

news

Hot keywords

Contact us

Company Name: Zibo Dao Maison Insulator Co。, Ltd。


Contact: Sun Manager


Phone: 0533-5582999


Mobile: 13864314352


Email: suntengyue@hyjtzrl.com


Fax:0533-5781150


Address: No。 1, Suwang Village, Kunlun Town, Zichuan District, Zibo City

Website:      en。zbdms。com

What are the properties of power pin insulators?

Your current location: Home >> News >> Industry news

What are the properties of power pin insulators?

Date of release:2018-12-12 Author: Click:

针式绝缘子.jpg

The basic properties of the insulator include electrical, mechanical and thermal properties。 In addition, it has environmental and aging resistance。


1 Electrical performance: Destructive discharge along the insulating surface is called flashover, and flashover characteristics are the main electrical properties of the insulator. For different voltage levels, the withstand voltage requirements of the insulators are different. The indicators include power frequency dry, wet withstand voltage, lightning impulse withstand voltage, lightning impulse cut-off withstand voltage, and operating impulse withstand voltage. In order to avoid breakdown during operation, the breakdown voltage of the insulator is higher than the flashover voltage. In the factory test, the puncturable porcelain insulator is generally subjected to a spark test, that is, a high voltage is applied to cause frequent sparking on the insulating surface for a certain period of time to see if it is broken down. Some insulators also need to pass corona test, radio interference test, partial discharge test and dielectric loss test. In high-altitude insulators, the electrical strength decreases due to a decrease in air density. Therefore, the withstand voltage should be increased when converted to standard atmospheric conditions. The flashover voltage of a dirty insulator is much lower than that of its dry and wet flashover voltage. Therefore, the contaminated area must be reinforced or with a pollution-resistant insulator. The creepage ratio (the ratio of creepage to rated voltage) should be Normal type is high. Compared with AC insulators, DC insulators have poor electric field distribution, adsorption of particles and electrolysis, and low flashover voltage. Generally, special structural design and larger creepage distance are required.


2 Mechanical properties: Insulators are often subjected to the gravity and tension of the wire, wind, ice weight, insulator weight, wire vibration, equipment operating mechanical force, short-circuit electric power, earthquake and other mechanical forces during operation. The relevant standards have strict requirements on mechanical performance regulations.


3 Thermal properties: Outdoor insulators are required to withstand rapid temperature changes。 For example, porcelain insulators require several cycles of hot and cold without cracking。 Due to the passage of current through the bushing, the temperature rise of the components and insulation and the allowable short-time current values shall comply with the relevant standards。


The address of this article:http://en.hyjtzrl.com/news/399.html

Key word:

Recently browse:

Related products:

Related news:

  • Service
  • number
    13864312352
  • Message
  • Online Service
    Please leave a message
    Please input the message here, and we will contact you.
    Name
    Name
    Tel
    Tel
    Mailbox
    Mailbox
    Address
    Address
    重庆幸运农场注册 湖南快乐十分官网 欢乐生肖网上哪里买 欢乐生肖玩法 大发快3官网 欢乐生肖网上投注 大发快三官网 大发快三 重庆幸运农场平台 大发快三网址